Boost Gauge Fittings & Tubing Kits
The NoBuzz™ fittings eliminate the vibration
and noise of boost gauges when installed on automobiles with turbocharged
engines.
Mechanical boost gauges use a feed line from the turbocharger
to directly measure boost pressure. A gauge vibration can occur
because the air from a turbocharger comes out in high frequency
air pulses that can cause the gauge to rattle or “buzz.”
This noise can be eliminated by splicing a restrictor into the
boost gauge feed line.
The NoBuzz T-fitting has a restrictor orifice, designed to gauge
manufacturers’ specifications, integrated into its feed
arm. This design simplifies installation, gives a clean look,
eliminates multiple points of failure with using an add-on restrictor,
and retains boost gauge response time as compared to other solutions
such as add-on in-line fuel filters.
The inline fitting, used in our DieselPod kit,
is designed to be spliced into the boost gauge feed tubing and
can easily retrofitted to existing boost gauge installations.
|
|
|
 |
VW 2.0 TSI MultiTap Hose
For VW 2.0 TSI engines. Integrated with a NoBuzz restrictor and one additional boost tap fitting. Replacement for existing OEM hose. No distortion of existing hose and gives a clean OEM apppearance.
$50
|
|
|
|
So, how do you install it on a TFSI? |
VW/Audi 2.0 TFSI & Audi A4 2.0 FSI NoBuzz Fitting Kit
For VW/Audi 2.0 TFSI and Audi A4 (B6/B7 Chassis) with 2.0 FSI engines $10 |
|
|
|
|
|
 |
VW/Audi 2.0 TFSI & Audi A4 2.0 FSI NoBuzz Boost
Tubing Kit
For VW/Audi 2.0 TFSI and Audi A4 (B6/B7 Chassis) with 2.0 FSI engines. Includes NoBuzz fitting, 6' nylon tubing, brass barb
connectors, zip ties, clamps
$16 |
|
|
|
|
|
 |
Mk5 NoBuzz T-Fitting Kit
For VW Mk5 2.0 FSI engines
$10 |
|
|
|
|
|
|
|
Mk5 NoBuzz Boost Tubing Kit
For VW Mk5 2.0 FSI engines. Includes NoBuzz T-fitting, 6' nylon tubing, brass barb
connectors, zip ties, clamps
$16
|
|
|
|
|
|
|
|
|
|
|
|
Mk4 NoBuzz T-Fitting
3/16" x 3/16" x 1/8"
for Mk4 1.8T. Will fit other aspirated engines such as Subaru.
$5
|
|
|
|
|
|
|
Mk4 NoBuzz Boost Tubing
Kit
Includes 6' nylon tubing, brass barb connector,
zip ties
$12 |
|
|
| |
|
|
 |
90° Threaded Male NoBuzz Connector
1/8" X 27 threads (used for Mk4/Mk5 TDI applications)
$5 |
|
|
|
|
|
 |
NoBuzz
TDI Boost Tubing Kit
Includes 8' nylon tubing, NoBuzz fitting, brass barb connector,
zip ties $12 |
|
|
|
|
|
 |
90° Barbed Boost Gauge Connector
This fitting is to install boost tubing in tight clearance pods. Will fit most
boost gauges - Indigo, VDO, Autometer, etc...
$4 |
|
|
|
|
|
|
NoBuzz Inline Restrictor
3/16" diameter with integrated restrictor
$5 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
